Product introduction

Single component , high modulus and easy to use.
Great viscosity to most of the construction materials.
High bonding strength and fast curing.
Excellent tensile strength and the compression resilience.
Long service life, not turns to yellow or black.

Usage

1. Used for glass assemble and joint.
2. Filling and sealing the large flat glass or glass daylight roofs.
3. Filling and sealing the glasses of interior and outdoor.
4. Can be used for install most of aluminum-alloy glass, door and window.

Method

1. The surface of material must be clean and dry, no impurities and residue of silicone sealant. You can clean it by solvent, but you must notice the limit when the solvent is flammable.
2. Masking tape over the adjacent surface to assure the convenient clean afterwards.
3. Curing the rubber mouth with required size to connect hose. Adhesive must contact with both sides of the interface to ensure the adhesive is fully filled the interface.
4. Trim the tape before the adhesive curing.
5. Adhesive solidified in 5 minutes, stickiness in one hour, it will curing completely and achieve to the best strength after 7 days.
6. You can use the cloth or solvent to remove the wet adhesive. If the adhesive has solidified, you can remove it by the blade.

Notice

Storage in the normal temperature and dry environmen.
Can't use directly on the surface of the newly-built cement concrete.
Use lots of water to wash when the glue permeates into eyes. Avoid to be touched by child.
Strictly execute JG102-2003《Glass Curtain Wall Engineering Technology Regulation》in construction.
Because of the product characteristic and at the quite different situation of the temperature and humidity, the product volume change 9ml, which belongs to normal phenomenon.
Our product can be transported according to non-dangerous standard.